Comments on: ESP8266: NodeMCU Dev Kit Review https://blog.squix.org/2015/02/esp8266-nodemcu-dev-kit-review.html Thu, 09 Dec 2021 08:09:54 +0000 hourly 1 https://wordpress.org/?v=6.5.8 By: romka https://blog.squix.org/2015/02/esp8266-nodemcu-dev-kit-review.html#comment-403 Thu, 28 Jan 2016 05:12:06 +0000 http://blog.squix.org/2015/02/27/esp8266-nodemcu-dev-kit-review/#comment-403 The CH340 driver doesn't work in El Capitan, here is the way to solve it: https://tzapu.com/making-ch340-ch341-serial-adapters-work-under-el-capitan-os-x/

]]> By: Paul https://blog.squix.org/2015/02/esp8266-nodemcu-dev-kit-review.html#comment-175 Tue, 01 Sep 2015 04:49:09 +0000 http://blog.squix.org/2015/02/27/esp8266-nodemcu-dev-kit-review/#comment-175 Thanks for sharing this.
So far I wasn't able to get V0.9 to work with my MBA, but I used a CH340 driver from some other place. Can't wait to get home and try out the one from raysfiles.

]]> By: Gus Smith https://blog.squix.org/2015/02/esp8266-nodemcu-dev-kit-review.html#comment-138 Tue, 21 Jul 2015 17:52:43 +0000 http://blog.squix.org/2015/02/27/esp8266-nodemcu-dev-kit-review/#comment-138 I use 2 mini breadboards with the power rails next to each other. Then you can plug the nodemcu across them so you have enough free space for jumper wires.

]]> By: squix78 https://blog.squix.org/2015/02/esp8266-nodemcu-dev-kit-review.html#comment-48 Sun, 17 May 2015 09:20:22 +0000 http://blog.squix.org/2015/02/27/esp8266-nodemcu-dev-kit-review/#comment-48 In reply to Boosey.

Hi Boosey
The process I describe here should in theory also work for the V0.9 version of the board (just with a different driver): http://blog.squix.ch/2015/05/esp8266-flashing-nodemcu-v10-on-mac-os.html

]]> By: kikko_fr https://blog.squix.org/2015/02/esp8266-nodemcu-dev-kit-review.html#comment-39 Wed, 29 Apr 2015 18:06:05 +0000 http://blog.squix.org/2015/02/27/esp8266-nodemcu-dev-kit-review/#comment-39 you just saved me a lot of headaches sharing your experience, thanks 🙂

]]> By: Boosey https://blog.squix.org/2015/02/esp8266-nodemcu-dev-kit-review.html#comment-38 Tue, 28 Apr 2015 14:01:30 +0000 http://blog.squix.org/2015/02/27/esp8266-nodemcu-dev-kit-review/#comment-38 Can you share your process for flashing the nodemcu firmware from a Mac? I was able to do it from Windows with the flasher tool, but I don't know what tool to use for Mac. I had to go dig an old Windows laptop out of storage. 🙂

]]> By: Anonymous https://blog.squix.org/2015/02/esp8266-nodemcu-dev-kit-review.html#comment-34 Tue, 31 Mar 2015 19:42:21 +0000 http://blog.squix.org/2015/02/27/esp8266-nodemcu-dev-kit-review/#comment-34 Hi,
I program this chip with nodeMCU firmware programmer and I find it's work fine on USB (Win 8.1).
But i can't do anything else, i'm not able to use AT command, it alway respond stdin:1: '=' expected near '+'.
And I don't find how to set softAP.
I try to put this "
wifi.setmode(wifi.SOFTAP);
wifi.ap.config({ssid="test",pwd="12345678"});"
in the init.lua file, but it don't seem to work.

]]> By: Anonymous https://blog.squix.org/2015/02/esp8266-nodemcu-dev-kit-review.html#comment-24 Sat, 28 Feb 2015 15:35:17 +0000 http://blog.squix.org/2015/02/27/esp8266-nodemcu-dev-kit-review/#comment-24 I have a board that is in the same price range and it has an Esp201. I am not able to use D0 to D3 as gpio also Xpd pin is always connected to vcc. The board ishttp://m.aliexpress.com/item/32266318927.html

Did you manage to use all 16 pins as Gpio?

]]>