Do you like this post? Writing posts
, developing libraries
and programming online font creators
is actually hard work. I order most of my electronics from a Chinese website called Banggood
. It is save and the items usually arrive in good quality. With every order you do there by following this link
you are supporting the blog. Thank you!
ESP8266 ESP-12E Serial Port WIFI Industrial Test Module Board With Full IO lead Out
1. Installed IOT.APK on the phone
2. Module ends with ESP8266FLASHER download software to update the firmware to the module
3. Replace the battery, mobile search to a network router AI-THINKER
4. Join the router (the router module form) password is: ai-thinker
5. Can use the phone after adding the success of the direct control module.
After the above steps:
1. Control module with the phone directly AP, then control the dimming switch IO
2. Basis or on a further step to enter the configuration menu, enter the home network
3. Once the module links on the home network, the module will automatically mount servers
The above step 1 can be without any router, the phone directly control module
Step 2 WIFI control module can use the phone at home
Step 3 Once the module is mounted to the server, the phone can be anywhere
2G 3G 4G network with traffic control.
1. Full IO port lead out to support AT and internal product development ESP8266
2. Raise a level of stability
3. Supports 3-way PWM 6 AD and all the way along the road IO speed UART
4. Firmware and test panels upgrade, available client (phone or PC) to directly control PWM IO or without external MCU UART
5. Test of the stability of ESP-12.
6. As a low-cost minimum system, AT commands can be developed or SDK download
1 x ESP8266 ESP-12E Serial Port WIFI Industrial Test Module Board
1 x Battery Case
A ridiculous amount of coffee was consumed in the process of building this post/project. Add some fuel if you'd like to keep me going!